For those who have a website or maybe an application, rate of operation is critical. The swifter your website works and then the swifter your applications operate, the better for everyone. Because a web site is just a number of files that connect with each other, the systems that store and access these files have a vital role in web site functionality.

Hard disks, or HDDs, were, right until the past few years, the most dependable devices for keeping data. Having said that, recently solid–state drives, or SSDs, have been gaining interest. Take a look at our assessment chart to view if HDDs or SSDs are more appropriate for you.

1. Access Time

Image

SSD drives have a completely new & inventive method of file safe–keeping according to the utilization of electronic interfaces as an alternative to any sort of moving parts and revolving disks. This new technology is much quicker, permitting a 0.1 millisecond file accessibility time.

Image

The technology powering HDD drives goes back to 1954. And even while it has been noticeably enhanced as time passes, it’s still no match for the ingenious ideas behind SSD drives. Having today’s HDD drives, the best data access rate you’re able to reach differs in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

With thanks to the exact same radical strategy allowing for quicker access times, also you can enjoy far better I/O efficiency with SSD drives. They are able to conduct double as many functions within a given time when compared to an HDD drive.

An SSD can manage at least 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance progressively enhances the more you apply the disk drive. Even so, as soon as it actually reaches a particular limit, it can’t proceed speedier. And due to the now–old technology, that I/O limit is a lot less than what you could get with a SSD.

HDD are only able to go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives don’t have any sort of moving elements, which means that there’s much less machinery included. And the fewer actually moving parts you will find, the lower the possibilities of failure can be.

The average rate of failure of any SSD drive is 0.5%.

Image

Since we already have mentioned, HDD drives depend on spinning disks. And something that works by using many moving components for extended periods of time is susceptible to failure.

HDD drives’ common rate of failure varies among 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have moving elements and need minimal cooling power. In addition they demand very little power to perform – trials have demonstrated they can be operated by a normal AA battery.

As a whole, SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives can be well known for getting loud; they are more prone to getting hot and when you have several hard drives in one hosting server, you will need an additional cooling device exclusively for them.

All together, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives enable swifter data file access rates, which generally, in return, enable the processor to finish data requests much faster and afterwards to go back to additional duties.

The standard I/O hold out for SSD drives is exactly 1%.

Image

HDD drives allow for slower accessibility rates rather than SSDs do, which will result for the CPU being required to delay, although scheduling resources for your HDD to uncover and give back the demanded data.

The normal I/O wait for HDD drives is just about 7%.

6.Input/Output Request Times

Image

In real life, SSDs carry out as admirably as they performed in the course of our tests. We ran an entire system backup using one of the production web servers. Over the backup process, the average service time for any I/O calls was in fact below 20 ms.

Image

Weighed against SSD drives, HDDs feature noticeably reduced service times for input/output calls. During a hosting server backup, the regular service time for any I/O request ranges somewhere between 400 and 500 ms.

7. Backup Rates

Image

Another real–life advancement will be the speed at which the back up is made. With SSDs, a server data backup now can take less than 6 hours by using our web server–designed software solutions.

Image

Throughout the years, we have got used mostly HDD drives with our web servers and we are familiar with their overall performance. On a hosting server pre–loaded with HDD drives, an entire web server back–up normally takes around 20 to 24 hours.

With Roy Hosting, you can get SSD–driven web hosting services at cheap prices. The shared web hosting plans and also the VPS servers incorporate SSD drives automatically. Apply for an web hosting account with us and experience the way your web sites can become far better right away.


  • Service guarantees

  •  
  • Join us now. There won’t be setup fees you’ll also find complete admin access to your server. 99.9% network availability is warranted.
  • Compare our prices

  •  
  • Check out our price list and pick the most suitable Virtual Private Server for your powerful web sites. You can upgrade to a more advanced VPS configuration with simply a click of the mouse.
  • Compare our hosting plans
  • Contact Us

  •  
  • We’re online for you night and day to reply to all inquiries about our VPS platform. 60–min reply time guarantee.